Pictures

57PRO SCORE
GIVE IT AN OVERALL RATING
2.85714285714286 1 5 0
2.85714285714286
7 VOTES

The Pioneer TS-A1702C are a pair of 6.75” 2-way component car-audio speakers.

Where to buy

Seller Price Seller Rating
Show more
Pros

sound quality is high enough running directly off of the HU to not need any amps

1 agrees

low range is distortion free

1 agrees

passive cross-over units are molded in - no screws to worry about

1 agrees

high range is well represented, details are clear and it avoids tin

1 agrees
  • Only 3 words are allowed.
Cons

installation is awkward and takes a few hours

1 agrees

distortion in all ranges when volume gets loud

1 agrees

not capable of clear, deep bass - volume tends to drop off at the bottom

1 agrees
  • Only 3 words are allowed.
Edit

 

The Pioneer TS-A1702C are a pair of 6.75” 2-way component car-audio speakers composed out of interlaced dual Aramid fibers wrapped in a composite IMPP cone. Similar to the TS-A1302C, TS-A1702C also ditches previous models’ midrange speaker in favor of a woofer. The more expensive TS-A1702C ($159.95 versus $139.95), however, utilizes a larger woofer (6.75” versus 5.25”), a higher maximum power handling (230w versus 180w), and a lower frequency response (31Hz-35kHz versus 36Hz-30kHz). Nonetheless, the TS-A1702C maintains its counterpart’s .875” Tetron soft dome tweeter and angled surface that allows users to customize the tweeter’s direction. Lastly, the Pioneer TS-A1702C features built-in outboard passive crossovers with –12dB/Oct, a speaker grille, and a mounting depth of 2.5”.

Features
  • Woofer Cone Material: Composite IMPP Cone with Interlaced Dual Aramid Fiber
  • Surround: Butyl Rubber for Smoother Response
  • Voice Coil Bobbin: Glass-Imide
  • Voice Coil Wire: OFC Copper
  • Damper: Conex
  • Tweeter: 7/8" Soft Dome with Magnetic Fluid and Neodymium Magnet
  • Basket Design: Full Depth Basket for Rich Bass Response
  • Built-in Passive Crossover: Outboard Crossover with -12dB/Oct. LPF/HPF
  • Speaker Grille: Included
  • Special: Surface (Angled), Flush and Invisible Tweeter Mounting
  • Watts MAX Music Power: 230w
  • Watts Nominal Power Handling: 50w
  • Frequency Response: 31Hz-35kHz
  • Sensitivity (1W/1m): 90dB
  • Ohm Rating: 4
  • Mounting Depth: 2-1/2" (62.5 mm)
About Us