Pictures

BE THE FIRST TO RATE THIS PRODUCT
0 VOTES

The Klipsch P-37F is the smallest floorstanding loudspeaker in Klipsch's high-end luxery Palladium series.

Where to buy

Seller Price Seller Rating
Show more
Edit

 

The Klipsch P-37F is the smallest floorstanding loudspeaker in Klipsch's high-end luxery Palladium series.  This series is designed to be as striking to the eye as it is to the ear.  The most notable visual feature is the exotic zebra-grain linia wood veneer cabinet, which is available in natural, merlot or espresso, and uses government sanctioned controlled harvests.  The speaker two speaker grilles are attached magnetically so when they are removed, the look of the speaker is not dimished by posts or holes. Behind the upper speaker grill, there is a 0.75"  tweeter and a 4.5" midrange, both of which are mated to a 90° x 60° Tractrix horn for an extended high frequency response. Behind the lower grill, there are three 7" hybrid cone woofers that are powered by a unique three-part neodymium magnet structure with dual stabilizing rings that reduce nonlinear flux. The three ports in the rear of the speaker enhance the superior bass response.  These speakers are designed to produce a higher dB output with the same about of power input as average speakers, saving energy use by up to 75%.  Unlike many other speakers in this range, the P-37F does not use off-the-shelf drivers; Klipsh has put years of engineering into their driver designs for optimal speaker performance. The Klipsch P-37F is sold as a pair for $8,000.


Specifications
  • Frequency response: 43Hz-24kHz +/-3dB
  • Low frequency extension: 31Hz
  • High frequency extension: 30kHz
  • Power handling: 275W continuous / 1100W peak
  • Recommended amplifier power: 50 - 600W
  • Sensitivity: 96dB @ 2.83V / 1m
  • Nominal impedance: 4 ohms
  • Mid-frequency crossover: 550Hz
  • High freq crossover: 3400Hz
  • Maximum acoustic output: 120dB (2 speakers in-room)
  • High frequency drivers: 0.75" (1.9cm) titanium diaphragm compression driver mated to 90° x 60° Tractrix Horn
  • Mid-frequency drivers: 4.5" (11.4cm) aluminum diaphragm compression driver mated to 90° x 60° Tractrix Horn
  • Low frequency drivers: Three 7" (17.8cm) high-output, aluminum / Rohacell® / Kevlar® Hybrid cone woofers
  • Enclosure material: Constrained layer MDF (medium density fiberboard)
  • Enclosure type: Bass-reflex via triple rear-firing ports
  • Height: 46.5" (118.1cm)
  • Width: 9.75" (24.8cm) (12" / 30.5cm at the base)
  • Depth: 19.5" (49.5cm)
  • Weight: 98 lbs (44.5kg)
  • Finishes: Zebra-grain Linia veneer in a natural, merlot or espresso stain
About Us