5 1 5 0

The Kicker IX1000.1 is a powerful subwoofer amplifier for car audio systems.

Where to buy

Seller Price Seller Rating
Show more

good flexibility in the low-pass filter, ideal for fine-tuning the car's audio system

1 agrees

small size can be fit under a seat without a problem

1 agrees

good range of power, works with a wide variety of subwoofers

1 agrees

remote control is responsive and gives some nice control

1 agrees

output is clean and free of distortion

1 agrees

good options available for different kinds of automatic turn-on

1 agrees

output is very clean, no distortion in the signal

1 agrees
  • Only 3 words are allowed.
  • Only 3 words are allowed.


The Kicker IX1000.1 is a powerful subwoofer amplifier for car audio systems. It uses a small footprint and Class D power to keep energy consumption low, but can deliver as much as 1000 Watts of power to the subwoofer. Balanced differential inputs are used to reduce noise and keep the amplifier compatible with most factory radios. The layout keeps all connections on one and and the user controls on the opposite end, making it possible to fit the amp in areas that have limited access. The system has 3 automatic turn-on modes to allow it to cut out when not needed, saving energy, and to have it kick in when appropriate.

  • Super-small footprint
  • Monoblock Class D
  • Simple install with all connections on one end of amp and all user controls opposite
  • Balanced differential inputs
  • 3 automatic turn-on modes
  • Mountable remote bass control with IX.1 sub amps
  • Optional IXSM stacking mount
  • Optional vinyl skins
  • 1-year extended warranty with the purchase of a qualifying KICKER install kit
  • RMS Power, all channels driven @14.4 Volts, 4Ω mono, ≤ 1% THD+N: 550 Watts, @ 2Ω mono, ≤ 1% THD+N: 1000 Watts
  • Dimensions (L x H x W): 9-3/8 x 2-3/16 x 7-7/8 in, 23.8 x 55 x 200 mm
  • Frequency Response: 25Hz-200Hz
  • Signal-to-Noise Ratio: 95 dB, a weighted, re: rated power
  • Input Sensitivity: Low Level 125mV-5V, High Level 250mV-10V
  • Electronic Crossover: Variable Low-Pass, 50Hz-200Hz, 24dB/octave
  • Remote Bass Capable: Yes (included)
  • Subsonic Filter: 24 dB/octave fixed@ 25Hz
  • Bass Boost: Variable 0-18dB Bass Boost @ 40Hz
  • Fuse, ampere 100
  • Power-Ground Wire, GA 4
  • CEA-2006 (Watts) @ 4 ohms, 14.4Vdc, 1% THD: 550 x 1
  • CEA-2006 Signal to Noise Ratio (ref: 1W, A-weighted): 75dB
About Us