2.99166666666667 3 5 0

The Definitive Technology BP-8080ST is a full-range floorstanding speaker designed for loud sound output.

Where to buy

Seller Price Seller Rating
Show more

extremely broad frequency representation, capable of very deep bass and the absolute top-end highs

1 agrees

good enough power output to fill a large sized room easily

1 agrees

binding posts are well designed, offer a few setup alternatives

1 agrees

attractive monolithic design, makes a statement without being imposing

1 agrees

audiophile-quality clarity and detail in the sound

1 agrees

enough bass not to need a separate subwoofer

1 agrees

good resistance to interference or static even with "noisy" equipment in the area

1 agrees
  • Only 3 words are allowed.

internal amplifier requires that you connect separate power leads for each speaker

1 agrees
  • Only 3 words are allowed.


The Definitive Technology BP-8080ST is a full-range floorstanding speaker designed for loud sound output. This is the top model in the series, following the Definitive Technology BP-8060ST by increasing the internal amplifier power to 455 watts and enlarging both the midrange drivers and subwoofer. General construction remains consistent with a bipolar design projecting sound out through both the front and back for a more dispersed sound, and the 3 BDSS midrange drivers are used for a life-like tonal balance. A pair of 1 inch aluminum dome tweeters cover the upper range and a single 12 inch powered subwoofer works with a pair of radiators for better resonance and sound transmission. An 8 ohm impedance is used to reduce the effect of interference for a cleaner, distortion-free sound.

  • Bipolar technology
  • Built-in 455 Watt powered subwoofers
  • Second generation BDSS high-definition drivers
  • Slim enclosure takes up minimal floor space
  • Dimensions (H x W x D): 48-14 x 7 x 16-5/16 in, 122.5 x 17.8 x 41.3cm
  • 3 x 5-1/4 in, 13cm BDSS midrange drivers
  • 2 x 1 in, 25mm aluminum dome tweeters
  • 1 x 12 in, 30cm active subwoofer driver pressure
  • 2 x 12-1/2, 32cm Low-bass radiators
  • Frequency response: 18Hz - 30kHz
  • Sensitivity: 92 dB
  • Impedance: 8 Ohms
  • Recommended amplifier power: 20 - 400W
  • A/V Receiver Crossover Setting: Large, full bandwidth
  • Internal amplifier power: 455 watts
  • Auto On / Off: Signal Sensing¬†
  • Inputs: One pair of 5 way binding posts; One LFE input (optional)
  • Accessories: Stabilizer feet; carpet spikes, hard floor glides
  • Weight: 66 lbs, 30kg
About Us