Pictures

92PRO SCORE
GIVE IT AN OVERALL RATING
4.58333333333333 2 5 0
4.58333333333333
12 VOTES

They are floorstanding speakers designed to cover the full listening range from deep bass to highs.

Where to buy

Seller Price Seller Rating
Show more
Pros

Very crisp, clear sound quality--appropriate for music and home theater use.

2 agree

Distortion-free even at high volumes.

2 agree

Comparable sound quality to speakers several times the price.

2 agree

Highs, mids and lows blend very well for even sound.

2 agree

Built-in subwoofer offers deep, resonant lows.

2 agree

Not too large or heavy as compared to other high-end tower speakers.

1 agrees
  • Only 3 words are allowed.
Cons

Somewhat more complicated setup than most tower speakers--tall, slim build requires the installation of the included footies for added balance.

1 agrees
  • Only 3 words are allowed.
Edit

 

The Definitive Technology BP-8060ST are floorstanding speakers designed to cover the full listening range from deep bass to highs, enabling them to work as stand-alone speakers or as part of a surround sound system. These follow the Definitive Technology BP-8040ST, using larger midrange drivers and a larger active subwoofer. The model that follows this one, the Definitive Technology BP-8080ST, adds more power to the internal amplifier and increases the size of the drivers as well. In all cases bipolar technology is used to project sound from both the front and back of the enclosure, filling the room with sound for a larger optimal listening area. The 4-1/2 inch BDSS midrange drivers work with a pair of 1 inch aluminum dome tweeters and a 10 inch subwoofer for full range sound reproduction, and an 8 ohm impedance enables a strong signal to be sent to the speaker to avoid distortion from interference.

Features
  • Bipolar technology
  • Built-in 300W powered subwoofer
  • Second generation BDSS high-definition drivers
  • Slim enclosure, 1 sq foot of floorspace
  • Dimensions (H x W x D): 44-3/16 x 5-15/16 x 13-7/16 in, 112.2 x 15.1 x 34.1cm
  • 3 x 4-1/2 in, 11.4cm BDSS midrange drivers
  • 2 x 1 in, 25mm aluminum dome tweeters
  • 1 x 10 in, 25cm active subwoofer driver pressure
  • 2 x 10 in, 25cm low-bass radiators
  • Frequency response: 20Hz - 30kHz
  • Sensitivity: 92dB
  • Nominal Impedance: 8 Ohms
  • A/V Receiver Crossover Setting: Large, full bandwidth
  • Internal amplifier power: 300 Watts
  • Auto On / Off: Signal Sensing¬†
  • Inputs: One pair of 5 way binding posts; One LFE input (optional)
  • Accessories: Stabilizer feet; carpet spikes, hard floor glides
  • Product weight: 54 lbs, 49kg
About Us