The Hydro Series H100i v2 is an extreme performance, all-in-one liquid CPU cooler for cases with 240mm radiator mounts. The 240mm radiator and dual SP120L PWM fans provide the excellent heat dissipation you need for highly overclocked CPUs. Corsair Link is built in, so you can monitor temperatures, adjust cooling performance and customize LED lighting directly from your desktop. Customer Service/QA /Technical Assistance Team: customer service/tech support: 1-888-222-4346 opt. 1
- 240mm dual-fan radiator: more surface area for superior cooling performance
- Improved cold plate and pump design: better efficiency gives you lower temperatures with less noise
- Advanced SP120L PWM fan design: better high-static pressure air delivery and customizable speed
- Built-in Corsair Link: monitor CPU and coolant temperature, adjust fan speed, and customize lighting directly from your desktop
- User replaceable inserts: Change the color of your cooler to match your system with the user-replaceable inserts on the radiator and pump cap. (Sold Separately)
- H100i v2 240MM
- H105 Thick 240MM
- H110 280MM
- H110i 280MM
- H110i GT 280MM
- H110i GTX 280MM
- H115i 280MM
- H55 Quiet 120MM
- H60 Performance 120MM
- H75 120MM
- H80i GT Thick 120MM
- H80i v2 Thick 120MM
- H90 140 MM
The Hydro Series H100i v2 is an extreme performance, all-in-one liquid CPU cooler for cases with 240mm radiator mounts. The 240mm radiator and dual SP120L PWM fans provide the excellent heat dissipation you need for highly overclocked CPUs. Corsair Link is built in, so you can monitor temperatures, adjust cooling performance and customize LED lighting directly from your desktop.
Attach the included Corsair Link cable to a USB header on your motherboard and download the free Corsair Link software to unlock even more power. You can customize cooling performance, monitor coolant and CPU temperatures, and change the color of the RGB LED lighting from the default white to match your system, or to change color based on temperature readings and other inputs.
Our custom-designed SP120L fans are different than standard case fans – they’re custom-designed to deliver high static pressure for mounting directly against radiators, and the fan blades are specially shaped for maximum air delivery with minimum noise. Since they’re PWM controlled, you can customize the fan speed to choose the optimal point on the performance/noise curve.
Gone are the days when watercooling required lots of work. The H100i v2 is a closed loop design that comes pre-filled, and it comes with a modular, tool-free mounting bracket for faster installation.
Corsair Hydro Series CPU coolers give you the power of liquid cooling in a compact, easy-to-install package. They offer superior cooling for higher overclocking performance, without the complexity of traditional water cooling kits.
Frequently Asked Questions
Do you apply thermal paste when installing?
I used the paste it came with with Arctic on standby if I got high temps. However, with 20% overclocking of i7-4770k, temp at idle is 30 - 35ºC. Under prime95, temp went to 65ºC.
Just ordered during this cold spell in the midwest. since it is a closed system should I be worried that the lines can freeze and crackduring tranist?
The coolant used in the Hydro series coolers is a 50/50 mix of propylene glycol and water, similar to the antifreeze in your car. You shouldn't need to worry about it cracking the unit because the coolant will not freeze unless it was like 35 degrees below zero.
I am wondering how this cooler would work in my original NZXT Phantom case?
It would fit just fine. You just screw the rad to the top of your case with the fans and screws included with the h105. Then you connect to your CPU. There are good video tutorials of how to install this on youtube.
Add New FAQ
- Fan noise level 37.7 dB(A)
- Fan static pressure 4.65 mmH2O
- Fan airflow 70.69 CFM
- Fan speed 2435 +/- 10% RPM
Add New Resource