The Bowers and Wilkins CCM 746S model is a mid-grade speaker unit manufactured specifically to be mounted in-ceiling.

Where to buy

Seller Price Seller Rating
Show more


The Bowers and Wilkins CCM 746S model is a mid-grade speaker unit manufactured specifically to be mounted in-ceiling; it is part of B&W's Custom Series speaker units. The CCM 746S is designed to remain compact in body size, yet also provide full two-way, dual channel support. The body design mimics that of B&W's 800 series model units with the wicker cone color and the additional Custom Series units with the black exterior body color. The CCM 746S speaker unit is fully equipped with one 6.5" (165mm) cone for bass/midrange sound and two 1" aluminum dome tweeters for high frequency sound.

The B&W CCM 746S includes additional features such as a three-way switchable equalization control for the high frequency tweeters, a frequency response rate of 50Hz-20KHz, a nominal impedance rating of 8 ohms, and a 9.1" total body diameter.

Note: The quoted MSRP is for a single speaker unit; a pair sells for double the MSRP of one speaker.

  • Mid-grade in-ceiling speaker unit
  • Provides two-way dual channel stereo sound
  • 6.5" bass/midrange driver with wicker body color
  • Three-way switchable equalization control for the high-frequency tweeters; suspended frame fixings for custom sound direction
  • Semi-black edge encasing which can be custom painted to match ceiling color
  • This unit does not include a pre-mount kit like other B&W models
  • Designed to mimic the B&W CCM 800 and Custom Series in body design and performance ratings 
  • Driver Units
    • 2 x 1" (25mm) aluminum dome12 tweeters
    • 1 x 6.5" (165mm) twin voice coil woven fiberglass cone bass/midrange
  • Frequency Range: -6dB at 40Hz and 22kHz
  • Frequency Response: 50Hz-20kHz ±3dB on reference axis
  • Sensitivity: 86dB spl (2.83V, 1m)
  • Nominal Impedance: 8 Ohms (minimum 3.0 Ohms)
  • Crossover Frequency: 3.2kHz
  • Maximum Amp Power: 130W
  • Body Finish: Semi-matte black suitable for customising or pre-painting (paint mask included)
  • Dimensions:
    • Frame Size/ Diameter:  9.1" (232mm)
    • Weight: 3.7lb (1.6kg)
    • Cut-out Size: (Diameter) 8.1" (205mm)
    • Depth Behind Surface: 95mm
    • Protrusion: 4mm
About Us