The CCM 618 is a fully functional two-way, single channel, speaker unit.

Where to buy

Seller Price Seller Rating
Show more


The Bowers and Wilkins CCM 618 model is a mid-grade speaker unit designed specifically to be mounted flush in-ceiling, or in-wall, when installed properly the CCM series speakers are barely visible. The CCM 618 is a fully functional two-way, single channel, speaker unit; this configuration is unlike the additional 600 series models which are all dual channel. The CCM 618 speaker unit is equipped with one 8" (200mm) fiberglass cone for bass/midrange sound and a 1" soft dome tweeter for high frequency sound.

Bowers and Wilkins recommends the CCM 618 model to be used as a center application in the main room of focus; such as a living area or entertainment room.

The B&W CCM 618 features an adjustable angle tweeter which is positioned at an initial offset for better sound direction, a frequency response rate of 41Hz-20KHz, a nominal impedance rating of 8 ohms, an included pre-mount kit specifically tailored for this model speaker(PMK c80), and a semi-white matte plastic edge encasing which can be painted to a custom matching ceiling color (paint mask included). Unlike the lower end model the CCM 616, the 618 has an upgraded total power handling range of 150W continuous and an added 3 position equalizer switch for more sound customization.

  • Mid-grade in-ceiling/in-wall speaker unit
  • Designed to be mounted flush against wall/ceiling
  • Center channel/ main room application use
    • Living Room
    • Entertainment Room
    • Home Theater Room
  • Two-way single channel stereo sound
  • Fiberglass bass/midrange driver
  • Semi-white edge encasing which can be custom painted to match ceiling color
  • Includes custom pre-mount kit (PMK c80)
  • Upgrades from lower end models
    • Fully adjustable tweeter positioned at an offset angle
    • Larger power handling range: 150W continous
    • 3 position equalizer switch
  • Driver Units
    •  1" (25mm) adjustable angle tweeter
    • 1 x 8" (200mm) fiberglass cone bass/midrange
  • Frequency Range: -6dB at 35Hz and 22kHz
  • Frequency Response: 41Hz-20kHz ±3dB on reference axis
  • Sensitivity: 90dB spl (2.83V, 1m)
  • Nominal Impedance: 8 Ohms (minimum 3.0 Ohms)
  • Crossover Frequency: 3.2kHz
  • Maximum Amplifier Power: 20-150W continuous into 8 Ohms on unclipped programme
  • Body Finish: Semi-matte white suitable for customizing or pre-painting (paint mask included)
  • Dimensions:
    • Frame Size/ Diameter:  11" (280mm)
    • Cut-out Size: 10" (254mm)
    • Weight: 3.8lb (1.7kg)
About Us