1.75 4 5 0

The B&W DS8S is a rear surround speaker that is designed to be used as either a monopole or dipole design.

Where to buy

Seller Price Seller Rating
Show more

multiple modes depending on application

1 agrees

choice of three real wood veneers

1 agrees

ideal for smaller rooms or setups where separate speakers are not ideal or optional

0 agrees
  • Only 3 words are allowed.

will not create the same sound imaging as a split speaker system

1 agrees

odd form factor compared to the much more common dedicated rear left/right/rear channels

1 agrees


1 agrees
  • Only 3 words are allowed.


The B&W DS8S is a rear surround speaker that is designed to be used as either a monopole or dipole design, and is a part of Bowers & Wilkins (B&W) top of the line 800 series of home audio speakers. In order to accomodate modern surround sound system, speakers are usually required at the side, or rear of the room.  The DS8S has been designed to be used in either configuration.  When being used in monopole mode, the DS8S acts as a 2-way system with its front 7" kevlar cone used as a bass/midrange driver and the front 1" aluminum dome tweeter used for highs.  In monopole mode, it should be placed at the rear of the room giving more directional information required for surround.  In dipole mode, the front tweeter is shut-off and a 4" Kevlar midrange and 1" aluminum dome tweeter on each side are used for mids and highs, while the front facing 7" kevlar cone is now only used for bass.  In this mode, the DS8S acts as a 3-way and gives a more cinematic feel when placed at the sides of a room.  Switching between the two modes can be done with a front mounted switch, or by using a 12V trigger. The tweeters are contained in Nautilus tapering tubes, which are designed to only project sound through a hollow pole magnet frontwards, and are tapered towards the rear to eliminate reflections off the rear of the cabinet producing unwanted sound effects. The cabinet is avaialable in three real wood veneers: cherrywood, rosenut and black ash; and comes with a removable black cloth grill for each of the 3 sides.

  • Crossover Tuning 
  • Nautilus Tapering Tube 
  • Tube-loaded aluminium dome tweeter
  • Bracket for on-wall mounting included
  • 2-way closed-box selectable dipole / monopole surround system
  • 3x ø25mm (1 in) aluminium dome high-frequency
  • 2x ø100mm (4 in) woven Kevlar cone midrange
  • 1x ø180mm (7 in) woven Kevlar cone bass / midrange
  • Frequency range(monopole mode): -6dB at 45Hz and 50kHz
  • Frequency range (dipole mode): -6dB at 45Hz and 18kHz
  • Frequency response: 60Hz - 22kHz ±3dB on reference axis (monopole mode)
  • Dispersion Monopole mode: within 2dB of reference response
  • Horizontal: over 40º arc
  • Vertical: over 10º arc
  • Vertical dipole mode: horizontal figure of eight
  • Vertical effective null zone: ±30º (250Hz - 15kHz)
  • Sensitivity: 89dB spl (2.83V, 1m)
  • Harmonic Distortion: 2nd and 3rd harmonics (90dB, 1m) (
  • Nominal Impedance: 8 Ohms (minimum 4.4 Ohms)
  • Crossover frequencies: 4kHz (monopole mode) / 250Hz & 4kHz (dipole mode)
  • Recommended Amplifier Power: 25W - 120W into 8 Ohms on unclipped programme
  • Max. Recommended Cable Impedance: 0.1 Ohms
  • Height: 360mm (14.2 in)
  • Width: 622mm (24.5 in)
  • Depth: 205mm (8.1 in)
  • Net weight: 15kg (33 lb)
  • Finishes (Real Wood Veneers): Cherrywood, Rosenut, Black Ash
  • Removable black cloth grills
  • 12V relay current requirement: 45mA
About Us